Vibrating Electric Automatic Clamping Paint Shaker Machine 750W

Automatic clamping paint colorant shaker , vibrating machine for coating , painting , varnish

Features

Automatic clamp and adjustable pressure to bear on the can according to the can size, will not squish or stave the can.

It’s suitable to 0.5L-20L all kinds of can/barrel, max load weight is 30kg.

Easy operation and few maintainence: with PLC microcomputer control, can set the shaking time freely by the “T1”“T2” “T3” time key, the longest time can be set is 9 mins.

High speed and thoroughly mixing by up and down continuous multi-shake movement.

Technical Data

Time of Mixing: 1-9min

Size of Mixing can: 0.5L~20L

Maximum weight of mixing can: 35KG

Suitable can height: 80~410mm

Suitable can bottom size:350(L)*350(W) mm

Power Supply: 220V/110V

Rated Power: 750W

Net Weight: 223KG

Gross Weight: 258KG

Machine Size: 740(l)*800(w)*1070(h)mm

Packing Size: 770(l)*840(w)*1210(h)mm

Control panel introduction

T1 button (1 min button): press this button, the clamping plate automatically clamps the canister, and finish appointed 1 minute mixing.

T2 button(3 min button): press this button, the clamping plate automatically clamps the canister, and finish appointed 3 minutes mixing.

T3 button(5 min button): press this button, the clamping plate automatically clamps the canister, and finish appointed 5 minutes mixing.

T1+T2: Press T1+T2 at the same time , clamping plate automatically clamps the canister, and finish appointed 4 minutes time mixing.

T1+T3: Press T1+T3 at the same time , clamping plate automatically clamps the canister, and finish appointed 6 minutes time mixing.

T2+T3: Press T2+T3 at the same time , clamping plate automatically clamps the canister, and finish appointed 8 minutes time mixing.

T1+T2+T3: Press T1+T2+T3 at the same time , clamping plate automatically clamps the canister, and finish appointed 9 minutes time mixing.

Button (Stop, lift button) :
A). When machine is in the state of "Mixing" or "Clamping", LCD shows "Mixing" or "Clamping". At this time, press this button, machine will stop mixing or clamping and lift the clamping plate.

B). When machine is in the "ready" state, LCD shows "Ready". At this time, press this button, the clamping plate will lift up, and stop when you release the button.

Our Service

•  Warranty: We offer a period of one year warranty for each equipment. Within guarantee period, we can help you judge the fault according to the failure phenomenon by E-mail. and send replacement part to you. If the fault has been caused by mis-use or abnormal conditions of operation, repairs will be billed at a normal cost in this case. An estimate will be submitted before repair work is started in case requested.
• Training:You can send personnel to our factory for free training on the machine.
• Inspection: You can send inspectors to our factory for inspection or we self-inspect following the technical requirements mentioned in contracts.
• Testing of equipments: all our machines are tested before shipment. All machines are at its optimal state when shipped.

Our Main Product includes

Automatic paint dispenser, Manual paint dispenser,Automatic paint mixer,Manual paint mixer,Automatic paint shaker.All our equipment machinery and products are developed and manufactured under stringent safety rules and meet CE.They are sold globally to retail paint stores, paint manufacturers, point of sale retailers and industrial users.